基于VB6_0和Pro_E的弧面分度凸轮三维参数化实体建模.pdfVIP

36 09 VB6. 0 Pro/ E 4 1 : 1004- 2539( 2012) 09- 0041- 04 VB6. 0 Pro/ E ( , 710021) 以弧面分度凸轮的几何学理论为基础, 基于VB 6. 0 和Pro/ E 实现了弧面分度凸轮的三维参 数化实体建模通过VB 程语言, 设计出能计算参数化的弧面分度凸轮理论廓面数据的友好界面 通过对凸轮基本参数的输入和运动规律的选择后, 即可计算出相应的凸轮廓面坐标点, 并将廓面数据保 存为/ . ibl0格式导入Pro/ E 3. 0 中生成曲线, 再生成曲面, 然后将曲面合并, 最后对理论轮廓曲面进行 法向偏置实体切除操作, 获得与凸轮毛坯进行布尔相减运算后得到的凸轮实体模型 弧面分度凸轮 参数化 VB Pro/ E 三维建模 空间曲面 3D Parametric Modeling of Globoidal Indexing Cam based on VB 6. 0 and Pro/ E Huang W i G Zh nghao Liu W ihua Li L i ( Shaanxi Univ rsity of Sci nc T chnology, Xi. an 710021, China) Abstract On th basis of g om tric th ory of globoidal ind xing cam, th 3D param tric mod ling of globoidal ind xing cam is r aliz d bas d on VB 6. 0 and Pro/ E. Th fri ndly int rfac which can calculat th contour surfac data of param tric globodial ind xing cam is d sign d through th VB programming languag . This int rfac can b us d to calculat th valu of th r l vant contour surfac points through basic param t rs input of cam and th choos- ing of motion law of cam follow r, and it will sav th fil as th format of 0 . ibl0 . Aft r that, th fil is import d into Pro/ E 3. 0 to g n rat curv and th n th curv s ar m rg d into surfac . At last, th normal offs t and solid r s ction op ration of th or tical contour surfac ar carri d out, and th cam solid mod l aft r cam blank Bool an substracting op ration is obtain d. Key words Globoidal ind xing cam Param tric VB Pro/ E 3D mod ling Spatial surfac , 0 , , , , (