基于MATLAB的静止同步补偿器研究.pdfVIP

学兔兔 总第48卷 第551期 电测与仪表 Vol。48 NO．S5l 20l1年 第ll期 Electrical~W ment＆Instrumentation Nov．2Ol1 基于MATLAB的静止同步补偿器研究 李定珍 ，陈彬彦 (i 南阳理工学院电子与电气工程系，河南南阳4730004； 2．哈尔滨工业大学航天学院，哈尔滨150001) 摘要：分析了静止同步补偿器的补偿原理、电路结构及其在改善电能质量中的作用。制作了三相桥三电平逆变 器作为静止同步补偿器的核心电路，采用输入输出方法建立静止同步补偿器的数学模型，采用电压内嵌型双闭 环控制策略，完成了静止同步补偿器的设计。借助MATLAB，sIMuuNK的电力模块搭建25kv配电系统及补偿器 电路。通过对电网电压波动、负载对电网冲击两种情况下的电路进行仿真分析，运行结果表明补偿器达到了预 期的补偿效果，有效地抑制了谐波，显著改善了负荷与电网连接处的电能质量。 关键词：静止同步补偿器；无功功率；数学建模；MATLAB仿真；电能质量 中图分类号：TM743 文献标识码：B 文章编号：1001—1390(201 1)l1—0049—05 Study of Static Synchronous Compensator Based on MATLAB LI Ding-zh朗1 ， CHEN Bin—yan ● (1．Department of Electronics and Electrical Engineering，Nanyang Institute of Technology，Nanyang 473004，Henan， China．2．School of Astronautics，Harbin Institute ofTechnology，Harbin 150001；China) Abstract：This subject analyzed the compensation principle of D．．STATCOM,the circuit structure and the role in improving the power quality．We designed a three-phase and three-level inverter bridge as the main circuit of D—STATCOM．I．put and output of the modeling method was used to establish the mathemafical model of D—STATCOM． Predictive control was proposed based on the embedded dual-loop voltage control strategy， rhe design was completed for the static synchronous reactive power compensator：25kV distribution systems and D-STATCOM circuit were built with the help of MATLAB／SIMULINK power module． simulation was done for the power grid voltage fluctuations and the impact of load on the grid．Simulation resuhs showed that D-STATCOM a