低变照明安装作业安全技术交底.docVIP

低变照明安装作业安全技术交底 低变照明安装作业安全技术交底提要：线路两端采用3号蝶形绝缘子固定，两线之间距离为100mm，中间采用针式绝缘子支撑固定。线路架设要水平一致 于 低变照明安装作业安全技术交底 工程名称交底日期：年 月 日 施工单位分项工程名称：低变照明安装作业 交底提要 交底内容： 低压变压器安装： 1.低压变压器安装采用专用低变箱控制，盘面分为A面380V，控制低变的操作面。B面为36V，低压线路控制操作面。控制开关为DZ20自动空气开关分两路控制36V线路，A面控制低变开关由漏电保护器控制； 2.低变安装在箱体正下方的箱架上，低变一、二次侧与上面控制箱两面的电压等级相对应。一次侧有瓷插式熔断器控制低变的额定电流； 3.配电箱A面表明380V电压等级，B面门上标明36V电压等级。 低压线路的架设： 1.低压线架空敷设线路水平高度距地为米； 2.线路两端采用3号蝶形绝缘子固定，两线之间距离为100mm，中间采用针式绝缘子支撑固定。线路架设要水平一致，沿墙上下部位为垂直架设间距与水平一致； 3.绝缘固定采用角钢，做支架在墙上、柱上，用铁胀栓打孔固定； 4.楼梯间照明沿上下踏步间缝垂直架设。每五层用蝶形绝缘子固定一处，要求横平竖直。 灯具安装： 1.灯口选用普通防水灯头250V4A，灯泡为36V60w，接线时两接头错开。 2.灯线接头包扎严密，没有明露体； 架设线路时，人字梯搭放要稳，防止摔伤，穿戴好相应的劳保用品，两人操作，持证上岗。 审核人交底人接受交底人 1、本表头由交底人填写,交底人与接受交底人各保存一份，安全员一份； 2、当做分部、分项施工作业安全交底时,应填写”分部、分项工程名称”栏； 3、交底提要应根据交底内容把交底重要内容写上。 于 Measures for the routine management of moral education in Middle SchoolsMethod of conventional management of moral education in middle schoolFirst, the guiding ideology:School moral education is an organic whole of the whole education work, always adhere to the school adhere to the moral education, education for this product, and actively promote the quality education, the school building efficient curriculum system of moral education, moral education, improve the sense of attraction and appeal, enhance the moral education work for through and timeliness. Teach everyone, service education and management education, and school moral education work must be with family education and community education closely together, to form a concerted pattern, and strive to create a good atmosphere for education, and to promote the all-round development of students, to establish a scientific moral education full of vigor the For long-term mechanism.Two, the goal of moral education:To guide the students to form the correct world outlook, outlook on life, values, to cultivate students unity and mutual assistance, honest and trustworthy, law-abiding, good quality, ha