扣件式(含悬挑式)脚手架安全监理细则.docVIP

扣件式(含悬挑式)脚手架安全监理细则 扣件式脚手架安全监理细则提要：脚手板及荷载检查内容：脚手板的材质应符合质量要求，安装时要铺设严密牢固。不得有探头板。作业层上的荷载要符合设计要求 扣件式脚手架安全监理细则 1施工方案审查时应注意的问题： 搭设扣件式脚手架必须编制施工方案，对于扣件式钢管脚手架，悬挑支撑部分和架体必须按照jGj130-2001《扣件式钢管脚手架安全技术规范》的规定，进行设计和编制施工方案并履行审批手续。 2悬挑梁及架体稳定检查内容： 外挑杆件与建筑结构应连接牢固，悬挑梁应按设计要求进行安装，架体的立杆必须支撑在悬挑梁上，按规范规定与建筑结构进行拉结。 3脚手板及荷载检查内容： 脚手板的材质应符合质量要求，安装时要铺设严密牢固。不得有探头板。作业层上的荷载要符合设计要求：承重架3kN/m2，装修架2kN/m2，材料堆放要均匀，不得集中。 4杆件间距检查内容： 立杆的纵距和横距，大横杆的间距，小横杆的搭设，都要符合施工方案的设计要求。 5架体防护检查内容： 脚手架外侧应用密目式安全网全封闭，安全网片连接用尼龙绳作承绳；作业层外侧要有高的防护栏杆和180mm的挡脚板。 6层间防护及脚手架材质检查内容： 作业层跳板下要有一道大眼安全网，下面10m处还要设一道大眼安全网。外挑型钢和钢管都要符合《炭素结构钢》（GB/T700）中的Q235-A级钢的规范规定。 7交底与验收检查内容： 搭设前要有书面交底，交底双方要签字。每搭完一步架后要按规范规定校正立杆的垂直、跨度、步距和架宽，并进行验收，要有记录。 Measures for the routine management of moral education in Middle SchoolsMethod of conventional management of moral education in middle schoolFirst, the guiding ideology:School moral education is an organic whole of the whole education work, always adhere to the school adhere to the moral education, education for this product, and actively promote the quality education, the school building efficient curriculum system of moral education, moral education, improve the sense of attraction and appeal, enhance the moral education work for through and timeliness. Teach everyone, service education and management education, and school moral education work must be with family education and community education closely together, to form a concerted pattern, and strive to create a good atmosphere for education, and to promote the all-round development of students, to establish a scientific moral education full of vigor the For long-term mechanism.Two, the goal of moral education:To guide the students to form the correct world outlook, outlook on life, values, to cultivate students unity and mutual assistance, honest and trustworthy, law-abiding, good quality, hard work, set a good XX students ideological quality, psychological quality and image quality. The formati