模板支撑架施工安全整治技术要点.docVIP

模板支撑架施工安全整治技术要点 模板支撑架施工安全整治技术要点提要：严禁使用木支撑。模板支撑应采用检测合格的钢管、扣件，不得使用严重锈蚀、变形、断裂、脱焊、螺旋松动的钢支撑材料 来自地产E网 模板支撑架施工安全整治技术要点 1、模板支撑施工前必须编制专项施工方案，并经企业技术负责人审批签字盖章后方可实施，施工方案内容包括模板支撑的计算、尺寸布置、装拆工序及针对性的安全措施等。 2、高度超过8m、跨度超过18m、施工总荷载大于10kN/m2或集中线荷载大于15kN/m的高大模板支撑系统的专项方案必须组织专家进行论证。 3、严禁使用木支撑。模板支撑应采用检测合格的钢管、扣件，不得使用严重锈蚀、变形、断裂、脱焊、螺旋松动的钢支撑材料。 4、模板支撑搭设严格按照施工方案要求进行，对立杆基础、立杆的垂直度、纵横向扫地杆、双向水平杆、剪刀撑等加以检查，确保符合施工方案的要求。模板支撑立杆下方不得使用砖垫。支模架立杆应对接，严禁通过横杆接长。立杆搭接长度必须达到1m，并使用3个及以上搭接扣件。严禁支模架与脚手架混搭。应采取梁两侧设立杆而不得使用梁底中央设立杆的支撑模式。 5、支拆模板前必须进行针对性的安全技术交底，交底双方履行签字手续。模板搭设后应组织验收，认真填写验收单，内容要量化。验收合格后方可进入下道工序，并做好验收记录存档。拆除模板须有拆模审批手续。 6、模板作业面的预留孔洞和临边应进行安全防护。支模应按规定的作业程序进行，模板未固定前不得进行下一道工序。严禁在连接件和支撑件上攀登上下，并严禁在上下同一垂直面上装、拆模板。结构复杂的模板，装、拆应严格按照施工组织设计的措施进行。 来自地产E网 Measures for the routine management of moral education in Middle SchoolsMethod of conventional management of moral education in middle schoolFirst, the guiding ideology:School moral education is an organic whole of the whole education work, always adhere to the school adhere to the moral education, education for this product, and actively promote the quality education, the school building efficient curriculum system of moral education, moral education, improve the sense of attraction and appeal, enhance the moral education work for through and timeliness. Teach everyone, service education and management education, and school moral education work must be with family education and community education closely together, to form a concerted pattern, and strive to create a good atmosphere for education, and to promote the all-round development of students, to establish a scientific moral education full of vigor the For long-term mechanism.Two, the goal of moral education:To guide the students to form the correct world outlook, outlook on life, values, to cultivate students unity and mutual assistance, honest and trustworthy, law-abiding, good quality, hard work, set a good XX students ideological quality, psychological quality and image quality. Th