气焊工安全操作技术基本要求.docVIP

气焊工安全操作技术基本要求 气焊工安全操作技术基本要求提要：气焊工必须经过有关部门安全技术培训，取得特种作业操作证后，方可独立上岗操作；明火作业必须履行审批手续 气焊工安全操作技术基本要求 1、气焊工必须经过有关部门安全技术培训，取得特种作业操作证后，方可独立上岗操作；明火作业必须履行审批手续。 2、施焊场地周围应清除易燃、易爆物品或进行覆盖、隔离。 3、氧气瓶、乙炔瓶必须按照《气瓶安全监察规程》的规定，严格进行技术检验，合格后方能使用。如果超出有效期，不得使用。应远离高温、明火和熔融金属飞溅物10米以上，氧气瓶避免直接受热。 4、氧气瓶、氧气表及焊割工具上，严禁沾染油脂。 5、氧气瓶、乙炔瓶应有防震胶圈，旋紧安全帽，避免碰撞和剧烈震动，并防止曝晒。冻结时应用热水加热，不准用火烤。氧气瓶、乙炔瓶必须按规定单独摆放，使用时确保两者间的安全距离。 6、点火时，焊枪口不准对人，正在燃烧的焊枪不得放在工件或地面上。 7、不得手持连接胶管的焊枪爬梯、登高。 8、严禁在带压的容器或管道上焊、割，焊接带电设备时必须尢切断电源，， 9、在贮存过易燃、易爆及有毒物品的容器或管道上焊、割时，应先把容器或管道清理干净，并将所有的孔、口打开。 10、铅焊时，场地应通风良好，皮肤外露部位应涂护肤汕脂，工作完毕应洗漱。 11、工作完毕，应将氧气瓶、乙炔瓶的气阀关好。氧气瓶应拧上安全罩。检查操作场地，确认无着火危险，方准离开。 Measures for the routine management of moral education in Middle SchoolsMethod of conventional management of moral education in middle schoolFirst, the guiding ideology:School moral education is an organic whole of the whole education work, always adhere to the school adhere to the moral education, education for this product, and actively promote the quality education, the school building efficient curriculum system of moral education, moral education, improve the sense of attraction and appeal, enhance the moral education work for through and timeliness. Teach everyone, service education and management education, and school moral education work must be with family education and community education closely together, to form a concerted pattern, and strive to create a good atmosphere for education, and to promote the all-round development of students, to establish a scientific moral education full of vigor the For long-term mechanism.Two, the goal of moral education:To guide the students to form the correct world outlook, outlook on life, values, to cultivate students unity and mutual assistance, honest and trustworthy, law-abiding, good quality, hard work, set a good XX students ideological quality, psychological quality and image quality. The formation of excellent moral education curriculum system and management sy