剪力争弯矩图例题(国外英文资料).docVIP

剪力图弯矩图例题(国外英文资料) Chapter 6 is a typical problem resolution The force of the beam is shown in figure a. Try to write the shear equation and the bending moment equation of the beam, and make the shear diagram and the bending moment diagram. Solution: (1) take the counterforce By the equation of equilibrium and the difference , We use the equilibrium equation to check the anti-force. (2) the shear equation and the bending moment equation are established Use the left end of the beam as the origin of the coordinate, and set up the coordinates, as shown in figure a. The shear equation and the bending moment equation are established in the case of the variation of the load at C. AC: CB: Please control the internal force of the cross section, drawing and drawing Graph: AC segment, shear equation: yes, it is a function, shear the graph is oblique line, so the shear force value of two end section,,, marked with a and c respectively in the coordinates, connection of a and c straight line is the shear force diagram of the segment. In the CB segment, the shear equation is constant, and the internal force value of any section of the section, for example, a horizontal line is the shear diagram for the section. The shear diagram of beam AB is shown in figure b. Graph: the second function of the bending moment equation is shown in the AC segment, which indicates that the bending moment is the second curve of the curve, and the bending moments of the two ends are obtained, respectively, in the coordinates of a and c. It is known by the shear diagram at the d point, where the bending moment obtains the extreme value. So the shear equation, the solution, the solution, is the d dot in the coordinates. According to a, d, and c, the curve of the moment is drawn. In the CB segment, the bending moment equation is a function of the moment, and the bending moments of the two endpoints are evaluated, in the coordinates of c, b, and in a straight line. The diagram of the AB beam is shown in fi