卸料平台制作与装置标准(国外英文资料).docVIP

卸料平台制作与安装标准(国外英文资料) The discharge platform offers a plan Greentown escape water garden 3 #, 5 # floor, shear wall structure, the floor 13 and 15 layers, respectively, for 39 meters, 45 meters high, in order to transport materials in the process of subject construction is convenient, turn makings platform shall be built. According to the requirements of the construction inspection standard, the platform is designed as a suspension platform. Design basis Safety technical specifications for high construction work safety (jgj80-91) Safety technical specifications for structural steel pipe scaffolding (jgj130-2001) Steel structure design specification (gbj17-88) Standards for building safety inspection (jgj59-99) Second, the design plan Specification: the main beam is 6 meters long, the second beam is 1.8 ~ 2.0 meters long and the platform is 3.6 meters long. The main beam adopts [16 channel steel, the secondary beam adopts [10 channel steel; the steel wire rope with the diameter of 20mm is adopted. Third, production rules The material such as groove steel, steel wire rope, steel pipe fastener, foot hand plate, steel plate and so on meet the requirement. The use of corrosion, deformation, damage, and beyond the specification is prohibited. The channel used in the discharge platform shall be treated with rust prevention and the paint shall be bright yellow. 33.3 discharge platform welding personnel must hold the certificate and sign the acceptance form. The steel ring must be welded to the outside of the main beam channel, the connecting mode of the main beam and the secondary beam shall be welded, and the weld height shall not be lower than the thickness of the section. The platform is covered with 50mm planks, with flat steel. The center of the flat steel is 100mm of perforation, fixed with iron nails, and flat head welded to the main beam. The discharge platform shall handle the safety technology of the relevant personnel prior to the production and installation, and