人体工学检查表.pdf

现场人体工学简易检查表 Ergo Simple checklist No. Questions Yes No NA a Have material handling equipment and mechanical lifting equipment been provided to eliminate or reduce: highly repetitive tasks, heavy lifting greater than 40 pounds, excessive reaching, bending, twisting, etc.? 工厂有没有提供物品抓握或者提举设备，来消除或者减少：高重复的工 作，40磅以上的重提举动作，过度的伸展，弯腰或者扭腰。 b Is proper working height achieved by adjustability of standing platforms, use of lift tables, adjustable chairs, etc., where possible? 工厂有没有在可行的地方提供可以调节高度的站立平台，工作台面或者 座椅，来保证员工的合适的操作高度？ c Are twisting motions minimized by the use of conveyors or turntables, or by providing enough room for the employee to turn his or her whole body? 工厂有没有安装传送、旋转桌面来消除或者降低扭腰动作，或者提供足 够的空间给员工舒展身体？ d Is the work station designed so tools and machine controls are close to the station and designed to allow the worker to handle material close to the body? 员工工作区域的各种设备或者控制是不是很方便员工使用，员工操作的 区域是否离员工身体处于一个合适的距离？ Has work with the hands or elbows at or above shoulder level been e minimized? Is the job designed to allow work to be performed near the elbow height range of most workers (40-43.5 inches, precision work requires elbow heights slightly above this range, while heavy llifting is 4-8 inches below this range)? 手或者手肘处于肩膀以上的工作是否减少？工作是否允许员工的手肘处 于合适的高度？ f Have repetitive and forceful hand and wrist movements been minimized? 重复的或者用力的手部或者手腕动作是否减少？ Have static postures been minimized and are anti-fatigue mats provided for g employees standing for extended periods of time? 静态的姿势有没有减少，有没有给长期站立作业的员工提供防疲劳垫？ h