2R1T振动筛详解.docx

摘要振动筛是利用振子激振所产生的往复旋型振动而工作的。振子的上旋转重锤使筛面产生平面回旋振动，而下旋转重锤则使筛面产生锥面回转振动，其联合作用的效果则使筛面产生复旋型振动。其振动轨迹是一复杂的空间曲线。该曲线在水平面投影为一圆形，而在垂直面上的投影为一椭圆形。调节上、下旋转重锤的激振力，可以改变振幅。而调节上、下重锤的空间相位角，则可以改变筛面运动轨迹的曲线形状并改变筛面上物料的运动轨迹。产品优缺点： 效率高，质量轻，系列完整多样，层次多，对于干物料筛分可以满足需求。对于水分高，有粘附物料，该机型不适宜，工作时振动使物料更紧实的粘附于筛面，造成 物料拥堵或者被迫停机。由于工作原理限制，该机型耗能相对较高，尤其在大出力工况条件下。另外工作噪音和粉尘较重。关键词：振动筛，效率，原理AbstractVibration sieve is used to work with the vibration of the vibrator. Oscillator rotating hammer the resulting plane whirling vibration sieve surface, and rotating hammer the resulting cone rotary vibration sieve surface, effect of the combined effect of the screen surface to produce complex type rotary vibration. Its vibration trajectory is a complex space curve. The horizontal plane of the curve is a circle, and the projection on the vertical plane is an ellipse. The exciting force adjust the upper and lower rotating hammer, can change the amplitude. And adjust the upper and lower weight space phase angle, changing the sieve surface trajectory curve shape and alter the trajectory of the material on the surface of the screen. Product advantages and disadvantages: high efficiency, light quality, series of complete and diverse, multi-level, for dry material screening can meet the demand. For high moisture, adhesive materials, the models are not suitable, vibration makes the material more tight adhesion on the screen surface, resulting in material congestion or forced to shut down. Due to the limitation of working principle, the model is relatively high energy consumption, especially under the condition of large output. In addition, noise and dust are heavy.Key words: vibrating screen, efficiency, principle目录第一章 绪论11.1振动筛概述1振动筛21.2振动筛国内外发展状况41.3振动筛组成部分5第二章 2R1T振动筛设计方案52.1 原始设计参数52.2 2R1T振动筛运动过程分析52.3 2R1T振动筛运动方案设计92.4 振动频率和轨迹分析92.4.1振动频率92.4.2 振动强度92.4.3 抛射强度92.4.4 筛箱倾角92.4.5 振动方向角9第三章 相关计算103.1 电机计算及选型103.2气缸选型计算11第四章 整机结构分析114.1 单个颗粒运动的受力分析124.2振动筛的振动系统124.3 激振器偏心质量偏心距16第5章 建模及仿真165.1solidworks软件介绍165.2三维动画仿真介绍17总结19致谢2