特钢330kV变电站联合构架最大应力分析.pdf

36 4 Vol. 36 No.4 2010 8 Journal of Lanzhou University of Technology Aug.2010 : 1673-5196(2010) 04-0102-05 特钢330 kV 变电站联合构架最大应力分析 , (, 730050) : 采用MIDAS/ Gen 结构设计有限元分析软件, 结合实际工程对330 kV 变电站构架作最大应力分析. 主要分 析正 使用工况施工安装工况及温度对联合构架最大应力的影响. 结果表明: 联合构架长度以180 m 为分界, 分 别由不同工况起控制作用;在任何情况下均需考虑大风工况及覆冰有风工况的作用和施工导线荷载的不利布置; 在考虑大风工况及覆冰有风工况的作用时可以不考虑地震作用影响. : 330 kV 变电站; 联合构架; 温度; 最大应力 : TU311.41; TU312.1 : A Maximum stress analysis of 330 kV substation framework with special steel ANG Xiu-li, LI Zh-i li (College of Civil Engineering, Lanzhou Univ. of Tech., Lanzhou 730050, China) Abstract: Maximum stressanalysis of framework on330kV substation wasperformed with finite element analysis software MIDAS/Gen for structural design. The influence of normal operational conditions, in- stallation conditionsandtemperatureon themaximum stress of unitedframework was analyzed emphatica-l ly. Theresult showed that the limit length of the unitedframeworkwas 180meters, andit wasrespective- ly controlled by different operational conditions. At the same time, the role of windconditions, icing wind- y conditions, and the unfavorable layout of construction wire loading should be taken into account. hen considering the role of wind conditions and icing windy conditions, the impact of earthquake may not be considered. Key words: 330 kV substation framework; united framework; temperature; maximum stress , , , . 1 联合构架有限元模型 . ,. , ,, . AUTOCAD 330 kV , ,MIDAS/Gen . 330 kV .139m, 1,1. [1-6]