作业许可证制度.pdfVIP

Permit to Work System 作业许可证制度 SSP 22 PERMIT TO WORK 作业许可证 SSP- 22 Nantong Construction Group Corporation Limited 南通建工集团股份有限公司 Page 1 of 16 Rev.00 Permit to Work System 作业许可证制度 SSP 22 CONTENTS 目录 1 SCOPE 范围 2 TERMINOLOGY/DEFINITIONS 术语与定义 3 RESPONSIBILITIES 职责 4 PROCEDURE 程序 5 ATTACHMENTS 附件 南通建工集团股份有限公司 Page 2 of 16 Rev.00 Permit to Work System 作业许可证制度 SSP 22 1. SCOPE 范围 1.1 The aim of this procedure is to provide guidance on the site Permit to Work system. 本程序的目的在于就现场作业的许可证制度提出指导性意见。 1.2 The site handles a large diversity of work, so the potential for serious accidents is high. To prevent them it is vital that there should be safe systems of work. They will often be applied and enforced by means of a formal Permit to Work system. 施工现场充满了高强度的作业，因此发生重大事故的可能性也比较高。为了防患于未然，必须 制定一套安全作业系统。其中用得比较多的是一种正式制度是作业许可证制度。 1.3 All Critical Operations will be under the control of a Permit to Work system operated by the Site. Specific training will be given to all employees on the PTW system. All permit requests must be made at least 24 hours prior to work commencing. 所有关键作业行为均必须处于现场作业许可证制度的控制之下。全体员工均必须接受有关作业 许可证制度的具体培训。各种作业许可证都必须在作业开始之前至少提前二十四小时提出申 请。 1.4 Routine Operations will not be covered by Permit to Work. 常规作业不需要办理作业许可证。 2. TERMINOLOGY /