玻璃纤维制备X-cor夹层结构工艺及压缩性能研究.pdfVIP

玻璃纤维制备 X-cor 夹层结构工艺及压缩性能研究 447 玻璃纤维制备 X-cor 夹层结构工艺及压缩性能研究 Study on Technicss of X-cor Sandwich Made by Fibre Glass and Compression Property 原永虎，肖军，李勇，谭永刚，党旭丹 (南京航空航天大学材料科学与技术学院，南京 210016) YUAN Yong-hu ,XIAO Jun , LI Yong ,TAN Yong-gang ,DANG Xu-dan (College of Materials Science and Technology ,Nanjing University of Aeronautics and Astronautics ,Nanjing 210016 ,China) 摘要:研究了玻璃纤维制备复合材料夹层结构 X-cor 的工艺，探索了去cor 夹层结构压缩性能及植入角度、密度、Pin 直 径等因素对压缩性能的影响.同普通泡沫夹层结构相比.X-cor 夹层结构的压缩强度提高 9. 7 倍，压缩模量提高 17.9 倍.随着植入角的增加，单位体积分数的 Pin 对 X-cor 夹层结构的强度和模量的增强效率均提高;不同直径 Pin 对 X-cor 夹层结构影响不同，大直径 Pin 对 X-cor 夹层结构强度增强效率高F 小直径 Pin 对 X-cor 夹层结梅模量增强效率高. 关键词:复合材料;X-cor 夹层结构;玻璃纤维z 压缩性能 文献标识码:A 文章编号: 1001-4381(2008) Suppl-0447-04 Abstract: Technicss of X-cor sandwich made by fibre glass was studied. The compression property and the effect of the factors such as embedded angle and embedded consistency of pins , the diameter of Pin was explored. Compared with the foam sandwich structure , the compression strength of X-cor sand- wich structure increases to 9.7 times , the compression modulus increases to 17. 9 times. As the inser- ting angle increases , the reinforced efficiency of the unit volume fraction of the pins to the intensity and modulus of the X-cor sandwich increase. The pins with different diameters have different influ- ences to the X-cor sandwich. The pins with bigger diameter will bring the higher reinforced efficiency to the intensity of the X-cor sandwich while The pins with smaller diameter will bring the higher rein- forced efficiency to the