冲压过程技术标准(国外英文资料).docVIP

冲压过程技术标准 Punching work Training materials Wei dragon 2004-5 Theory of the first chapter Cold stamping is a kind of advanced metal processing method, it is based on the basis of the metal plastic deformation, the use of mould and stamping of sheet metal processing equipment, in order to obtain the parts needed to shape and size. Stamping technology application range is very wide, in various sectors of national economy, almost all have stamping processing products, such as cars, planes, tractors, motor, electrical, instrumentation, railway, post and telecommunications, chemical industry and light industry occupies a considerable proportion of daily-use products. Cold stamping and machining compared with high productivity, low processing cost, stable high material utilization ratio, product size precision, simple operation, easy to realize mechanization and automation, and a series of advantages, especially suitable for mass production. The classification of stamping process The cold stamping process can be divided into two kinds: separation process and forming process. The separation process can be divided into falling material, punch and cutting edge, as shown in table 1-1. The forming process can be divided into bending, drawing, turning, turning, expanding, expanding, reducing and spinning, as shown in table 1-2. According to the shape, dimension accuracy and other technical requirements of the product parts, it can be processed by various processes to obtain satisfactory parts. Table 1-1 separation process The name of the process brief Features and applications blanking Cut through the closed contour curve with the punch, and the parts are washed down. Used for making all kinds of tablet-shaped parts. punching Cut through the enclosed contour curve with the punch, and the waste is washed down. trimming Trim the edges of the forming parts neatly or in a shape. Table 1-2 forming process The name of the process brief Features and applications bending The plates are b