测井说明(国外英文资料).docVIP

测井解释 The evaluation reservoir is the basic parameter not; not; not; not; not; Porosity, permeability, saturation The H elements are the best moderators of fast neutrons in the common elements that make up sedimentary rocks; The rocks effect on the thermal neutrons is determined by the CL in the rock The interaction between neutron and matter mainly includes elastic scattering, inelastic scattering, and flotation. The measured results of the four deep lateral direction, shallow lateral and microlaterally, were measured in the area of the original formation, the flushing belt, and the resistivity of the overband. The greater the density of the layer, the faster the sound waves travel in the stratum, and the measured sound jet lag The main radionuclides in the rocks are U, TH and K, and the natural radioactive strength of sedimentary rocks is mainly determined by the amount of mud in the rock. The gamma radiation released by radionuclides in the decay process produces photoelectric effects, Compton effect, electron pair effect. The microlog is composed of micropotentials and microgradients, which are characterized by RLML R2ML on the microelectrode curve. According to the base gradient electrode system, the maximum value of the Ra curve can be divided into the bottom of the stratum. The oil saturation So with the water saturation Sw is So + Sw = 1. The oil and gas layers must have two important characteristics of porosity and permeability. In the m-2 crossplot, it is used to determine the lithology of the strata. 14, on the rapid visual figure, Φ not; - Φ xo said residual oil porosity, Φ xo - Φ w not; Movable oil porosity, Φ - Φ w not; Oil porosity. 15, for shale line, formation permeability of SP to the positive or negative direction to deflect, it mainly depends on the relative salinity, RW and RMF in RW RMF positive anomaly SP curve appear when, local water flooded layer within the biased big features on SP curve. 16, induction logging detection character