毕业设计6-9.docVIP

摘要 随着科学技术的提高，手势识别技术在社会中的应用越来越广泛。而且ARM的应用越来越广，本文是针对ARM的学习。Cortex-M3 是ARM 公司为要求高性能(1.25 Dhrystone MIPS/MHz)、低成本、低功耗的嵌入式应用专门设计的内核。。STM32 系列产品得益于Cortex-M3 在架构上进行的多项改进，包括提升性能的同时又提高了代码密度的Thumb-2 指令集和大幅度提高中断响应的紧耦合嵌套向量中断控制器，所有新功能都同时具有业界最优的功耗水平。 本课题是基于stm32的静态手势识别。我们在硬件方面，以STM32F103主控芯片及其外围扩展电路实现系统整体功能；手势识别是通过OV7670摄像头采集手势图像，经过单片机的处理，当手势不同时，液晶显示器上显示的数字不同，来实现对手势的识别。 经过对STM32开发板和OV7670等芯片的学习，最后实现了图像的实时采集、存储和读取。设计过程中碰到了很多问题、一些与课题相关的问题基本都解决了，还有些不属于本论文研究范围的，也做了一些探究和研究。 关键字：ARM 手势识别 STM32 OV7670 Abstract With the improvement of science and technology, application of gesture recognition technology in the society more and more widely in the. And ARM is used more and more widely, this paper is aimed at learning ARM. Cortex-M3 is the ARM company for the requirement of high performance (1.25 Dhrystone MIPS/MHz), the embedded application of low cost, low power design specific kernel.. A number of STM32 products benefit from the Cortex-M3 architectural improvements, including improving performance and improve code density Thumb-2 instruction set and greatly improve the tightly coupled nested vector interrupt response to the interrupt controller, all the new features are also has the power level of the industry best. This topic is static gesture recognition based on stm32. We in the aspect of hardware, STM32F103 control chip and its peripheral circuits to achieve the overall function of the system; hand gesture recognition is captured by OV7670 camera gesture image, through the SCM processing, when the gesture is not at the same time, LCD display digital, to realize the recognition of gesture. After the STM32 development board and the OV7670 chip learning, finally realizes real-time acquisition, image storage and read. The design process encountered some problems related with the subject, the basic problems are solved, and some do not belong to the scope of this thesis, but also to do some exploration and research. Keywords: STM32 OV7670 ARM gesture recognition 摘要 1 第一章