竖向荷载作用下的智能罐胶敏感性分析.pdfVIP

The 12th International Symposium on Structural Engineering PERCEPTION EFFECT ANALYSIS OF SMART POT RUBBER BEARING UNDER VERTICAL LOAD Bin Huang, Yonghui Feng, Roohollah Fallahi Seresh, Xingqi Song School of Civil Engineering and Architecture, Wuhan University of Technology, Wuhan 430070, P.R. China Abstract : On the basis of traditional pot rubber bearing, optical fiber strain sensor is introduced to design a type of new pressure sensor, which is able to measure the vertical load of the pot rubber bearing. In this paper, by using ANSYS software, a three-dimensional finite element model of the new pot rubber bearing with smart perception ability is established. Then the load-strain relationship of measuring force steel sheets as well as the arrangement position of optical fiber sensors are studied through numerical analysis. Finally, a full-scale test of a designed bearing is completed. The test results show that the linear fitting degree between the vertical load and the fiber strain is very well, and the sensitivity of load to optic fiber strain in the test is almost the same as that of the numerical simulation. All of these illustrate that the designed smart pot rubber bearing is capable of correctly percept the vertical load of the bearing automatically and timely. Keywords: Pot rubber bearing, optical fiber strain sensor, vertical load, measuring force steel sheet, load-strain relationship Pot rubber bearing not only has a large exclusively. In the process of realizing the bearing capacity, flexible rotation and a large design, some specific measures are taken so that range of horizontal deformation, but also the local strain of the measuring force steel sheet possesses the charac