(扬声器规格书).docVIP

1 SPEAKER SPECIFICATIONS （扬声器规格书） PRODUCT NO. FCSB28E-8A(LEAD FREE) （产品型号） PAGE NO. SUMMARY 页号 （概要） 1 SPECIFICATIONS 规格要求 2 RELIABILITY TEST 实验要求 3 DIMENSION AND FREQUENCY RESPONSE 尺寸和频率响应 4 CONSTRUCT 结构 5 TESTING CRITERION DRIVING LOOP 测试线路驱动回路 FULLING CEIEC CO.,LTD  2 SPECFICATIONS (规格要求) OUR PART NO. 本厂型号 FCSB28E-8A ITEMS 项 目 SPECIFICATIONS 规格 TEST CONDITION 测试条件 RATED INPUT POWER 定格入力 W MAX INPUT POWER 最大入力 W OUTPUT S.P.L. 出力音压 90± 3dB 0.1m 0.1w IMPENDANCE 阻 抗 8Ω±15% At 1KHz 1.55v RESONANTFREQUENCY 谐振频率（F0） 400Hz±20% Without baffle 1.55v BUZZESRATTLES 异常音 Should not be audible buzz and rattle At 1.55v sine wave between 300Hz to 10KHz DISTORTION 歪 率 5%MAX RATED POWER INPUT 1000HZ FREQUENCYRANGE 实效频率范围 F0～20KHz MAGNET Size: φ 9.5x1.5mm 磁 铁 Weight: 1.5g PRODUCT WEIGHT 重 量 g±10% FULLING CEIEC CO.,LTD  3 RELIABILITY TEST （实验要求） After having been in a test chamber for 3 days at the TEST IN HIGH TEMP 耐温试验 condition of +70℃, and then left 2hours in a room. Sensitivity Change within 3dB relative to initial value, Fo/Impedance change within 10% relative to initial value. After having been in a test chamber for 3 days at the TEST IN LOW TEMP 耐寒试验 condition of -40℃±3℃and then left 2hours in a room. Sensitivity Change within 3dB relative to initial value, Fo/Impedance change within 10% relative to initial value. After having been in a test chamber for 60hours at the STATIC TEST 耐湿试验 condition of +60℃ 90%~95%R.H.and then left 4hours in a room. Sensitivity Change within 3dB relative to initial value, Fo/Impedance change within 10% relative to initial value. LOAD TEST 连续实验 At 0.3W white noise is applied for 96hours and then should satisfy the test described under item 01and 07. Droppingtoconcretefloorfrom1.60mheight,inthestate of packing，Directions: 1corner, 3 edges, 6 planes. Total DROP TEST 落下试验 10 times ，Sensitivity Change within 3dB relative to initial value, Fo/Impedance change within 10% relati