焊装生产线技术文件 welding line technical document.pdf

第二部分 焊装生产线技术文件 Part two Welding line technique document 了保证CH031 新车型尽快投向市场，使其生产能力和焊接质量，长城汽车股份有限公 司对CH031 车型混合焊装生产线项目进行邀请议价招标，特邀具有一定实力的厂家前来竞标！ 1、 项目名称：CH031 混合焊装生产线 Project name: CH031 mix production welding line 2、 招标内容及要求 Content and Request 2.1.1CH031 CH041 及后续两种车型 （后续两种车型为SUV 或轿车，不共平台）左右舵 两驱及四驱混合车身总成线、混合地板总成线、混合后地板总成线、混合前地板总成线、混 合机舱总成线 CH031 左右混合侧围总成线等夹具的设计（SE 分析、夹具三维设计，并进行 焊钳打点模拟） 制造 安装 调试，SE 分析在长城公司进行，长城公司参与SE 和仕样书制 作。 CH031 CH041 and the two kinds of model later(the later mode is SUV or saloon car, not the same Underbody) left and right driver mix production of two wheels drive and four wheels drive mix production of F/R floor and motor compartment line,CH031 LH/RH bodyside welding line . Designing , manufacturing , installing and debugging(SE analysis , the fixture 3D design , simulation of spot welding) , SE analysis will be in Great Wall Company , the Great Wall guys join the SE analysis and make the fixture specification together. 注：上述各总成线，能实现柔性生产的，尽量柔性化。仕样书应体现CH031 及后续车型 混合焊装线包含的所有线体、夹具及设备进行概念设计。 Attention : aforementioned welding line should as flexible as possible. The fixture specification should contain all of CHO31 project equipment and fixture, and should contain the concept designing of the second step fixture and equipments. 2.1.2 CH031 CH041 及后续两种车型混合车身总成线输送系统、混合地板总成线输送系 统、混合机舱 前地板 后地板分总成输送系统、左右侧围总成线输送系统 工位间输送设 备（包括检测工位及设备）的设计、制造、安装、调试。 Designing , manufacturing , installing and debugging of CH031(and the two kinds 1 天 进 步 一 点 点 of model later) project’s mix production welding line transportation system , including main line and F/R floor line and motor compartment line and LH/RH bodyside line . 2.1.3 自动化线体上各小总成上料设备 辅助上料设备 工位器具及装具的设计 制造 安装、调试，数量满足使用及物流要求。 Designing , manufacturing, installing and debugging of equipment for loading or assistant loading parts in AUTO line