主变空充引起直流系统连续换向失败原因分析及解决措施_康建爽.pdf

第3 卷 第5 期 智 能 电 网 Vol. 3 No. 5 2015 年5 月 Smart Grid May 2015 DOI ：10.14171/j.2095-5944.sg.2015.05.008 文章编号：2095-5944 (2015) 05-0415-08 中图分类号：TM 72 文献标志码：A 主变空充引起直流系统连续换向失败 原因分析及解决措施 康建爽，曹森，郝俊芳，张爱玲，孙巍峰，张克辉 (许继电气股份有限公司，河南省 许昌市 461000) Analysis and Solution of the Continuous Commutation Failure in HVDC Caused by Main Transformer Charging KANG Jianshuang, CAO Sen, HAO Junfang, ZHANG Ailing, SUN Weifeng, ZHANG Kehui (XJ Electric., Ltd., Xuchang 461000, Henan Province, China) ABSTRACT: Taking the continuous commutation failure in a converter station caused by a UHV substation main transformer charging as the analysis background, the digital simulation model is built, and the internal relationship between the main transformer charging and the continuous commutation failure is analyzed. According to the analysis results, software optimization for the control logic function of the control and protection system is made, and laboratory simulation is conducted to verify that the optimization can effectively inhibit continuous commutation failure during the above process. At last, the improvement measures are applied to the converter station and field experimental test is made. Field practice confirms that the improvement measures can effectively avoid continuous commutation failure in converter station during the process of the UHV main transformer charging. KEY WORDS: HVDC; converter valve; continuous commutation failure; overlap angle; extinction angle 摘要：以某特高压变电站主变空充引起临近换流站发生连续换向失败为分析背景，建立数字仿真模型，分析研究主变空充与 换流站连续换向失败之间内在关联关系。根据分析结果，对控制保护系统对应控制逻辑功能进行软件优化，并进行实验室仿 真证实该修改有效抑制上述过程换向失败发生。最后，将上述改进措施应用该换流站并现场试验测试。现场实践证明：改进 措施有效避免特高压主变空充过程中引起换流站连续换向失败。 关键词：高压直流