Professional stereo-c-mark feedback suppressors are used in multiple microphones(国外英文资料).docVIP

Professional stereo-c-mark feedback suppressors are used in multiple microphones(国外英文资料) Acoustic feedback suppressors are used in multiple microphones Most sound engineer in the use of acoustic feedback suppressor, have this experience: when using a single receiver, if the receiver noise, using the acoustic feedback suppressor (for example, by using the insert method) can be the ideal whistlers to suppress. When used at the same time, however, more than a microphone, often received the noise effect is not ideal, often can appear only some of them even single microphone inhibition effect is good, the rest of the receiver when push the volume, whistlers unchecked. So where is the problem? Here is a question about the cause and the solution to this problem. As we all know, due to the structure and characteristic of microphone, different brand microphones frequency response, impedance, such as sensitivity, directivity index is not consistent, even the same brand microphone on these indicators also exist in different degree of difference, plus each microphone in be used actually use and placement objective factors such as different, caused by the microphone feedback noise frequency point is not in the same volume. If we use the conventional method of frequency shift, often happens first the noise of the receiver will trigger point frequency shift suppressor, result more than the rest of the team is not the noise of the receiver has not been effective frequency shift. When the volume is turned up, the microphone will whistling, and the suppressor is powerless. If we use more than one sound feedback inhibition for insertion method, respectively, to which the receiver point frequency shift, so, many of these problems can be solved, but this is caused by the rising cost of the equipment. If there is a comprehensive singing and dancing party, this configuration will be time-consuming and impractical for installation and commissioning. In fact, the solution is very simple, a