UVLayout tutorial(国外英文资料).docVIP

UVLayout tutorial(国外英文资料) The first video is the quick intercept In C ED mode the UV line is drawn The UV mode is cut off Draw the green UV line in 3D mode ENTER ED mode to determine the object with the UV line open In UV mode, the merge of objects on the edge of the UV line selected by the red line/or the green part of the MASK is separated W ED mode cancels the UV red line drawn In UV mode, merge or draw the UV line/red line to display the connection line 3D mode the combined drawing of the UV red line SHIFT + W UV mode to select the red line/LOOP to cancel the selected red line M UV mode [when drawing have been done on the combined UV line/red] under the condition of the object point on M would normally connected objects close to The f-uv mode allows the use of the mouse to choose between relaxing UV points with the physical algorithm SHIFT + F UV mode to loosen the UV space key after the edge is the circular PLET pull Whitespace + F UV mode is continuous with the physical algorithm to relax UV and press the blanks SHIFT + space + F UV mode is continuous with the physical algorithm to relax UV and automatically lock the open edge with the purple line and then press the blanks to stop D ED mode to put the object in UV mode SHIFT + D ED mode to cancel the open object In UV mode, the uv-mode object is reinvested in the ED mode In A UV mode, the point is open to the point, which is the function of the function SHIFT + A UV mode cancels all of the stickiness points In the space ED mode, the mouse button moves the object that is already cut In UV mode the mouse button object moves/mouse right/mouse button is rotated H ED mode/UV / 3 d mode under the mode of the left mouse button hidden objects/the right mouse button Hidden outside of selected objects [S reverse hidden U] Ctrl UV mode the mouse left/center/right movement point In the ED / 3D mode, the left mouse button is rotated 360 degrees in the Z axis SHIFT UV mode moves the mouse left/center/right brush mode Ctrl