第六章 表面粗糙度(国外英文资料).docVIP

第六章 表面粗糙度(国外英文资料) Chapter 6 surface roughness Summary of 61 The plastication of the cuttings during the machining process due to the separation of cuttings from the cutting process High frequency vibration cutter in the processing system and the friction of the processed surface The reason for this is that the surface of the processed parts produces tiny peaks and valleys The microscopic geometry of the small spacing and peak valleys of the processing surface Its the surface roughness of the parts Surface roughness is a kind of microscopic geometry error which is also called microscopic inaccuracy Surface roughness and shape errors are usually separated by wave spacing The surface roughness of the surface roughness of the surface of the surface roughness of the surface of the surface roughness is in 1 ~ 10mm is the surface of the surface wave degree and the error wave length is greater than 10mm is a macroscopic error of shape error Surface roughness has an important effect on the performance of machine parts Performance in The effect of 1 on friction and wear The effect of the coordination Effect of 3 on contact stiffness The effect of 4 on fatigue strength The effect of resistance to corrosion The effect of the binding sealability In addition, surface roughness also affects the uncertainty of measurement when inspecting parts The shape of the parts and so on Overall surface roughness affects many of the functions of the parts affecting the machine or The reliability and service life of the instrument will improve the interchangeability of the product quality At present, the national standard of surface roughness in China is mainly GB/Tsurface roughness parameter and its value GB3505 Surface roughness terminology and its parameter GB131 surface roughness generation The symbol and its injection method GB10610 stylus instrument measure surface roughness Rules and methods, etc 6-2 surface roughness evaluation criteria A basic terminology The contour line of