供应除氧装备公用的优质海绵铁除氧剂滤料(国外英文资料).docVIP

供应除氧设备专用的优质海绵铁除氧剂滤料(国外英文资料) To remove Fe2 + from water, the sponge iron for water deoxidizing agent is used for Fe3O4 powder with the grain size below -200, and the granularity is about 3 to 5mm. Because of the reduction process substitution reaction, form a certain number of gap, the gap and the powder particles bonding, makes the deoxidant high porosity, specific surface area is large, and because its for primary ore direct reduction, relatively pure, so very high activity, react with the oxygen in the water to generate Fe3O4, and thus reach deaerating purpose; At the same time utilization was increased to over 90%; And because it contains a certain amount of impurities, it can only be a weak bond between particles in the process of oxygen removal. By several units after using the product, the effect is very ideal, water oxygen levels fall below 0.05 mg/L, processing per cubic meter of water consume only about 25 g, really high quality and low cost operation. Because the surface of the deoxidizer can be passivated by the softening of the water, the oxidation of the oxygen is slowed down, and the effect of the effect of deoxidization should be softened before oxygen. After a while, it should be done in reverse. The sponge iron filter is a cost-effective energy-saving product. Its principle of oxygen removal: the sponge iron with huge specific surface area as the filter material, when water containing dissolved oxygen through the sponge iron, oxygen living radical oxidation reaction with sponge iron accumulation to a certain extent, can through the backwash drainage, restore to the original deoxidization ability; The common specification of sponge filter material: 1-3mm, 3-5mm, 5-8mm (special specification can be processed separately). Application range of sponge iron: various boilers, heat exchanger, thermal pipe rehydration, industrial circulation cooling water and water injection. Our fiber ball is made of high aldehydes, the shape of polyester yarns is made of