最新结构设计SATWE总信息参数标准链接(国外英文资料).docVIP

最新结构设计SATWE总信息参数规范链接(国外英文资料) Article 3-1 (strong) Maximum spacing (mm) : SB = 100.00... The concrete gauge 10.2.10 table 10.2.10; Desirable 100-400, Seismic design take encryption area spacing, generally take 100, see the article 6.3.3 (3) rules, article (strong) column stirrup spacing (mm) : largest SC = 100.00... The concrete rules 9.3.2; It is recommended that 100 to 400, when the design of aseismic design is used to take the spacing of the area of the encryption area, generally take 100, see the anti-regulation 6.3.8 section 2 (strong bar) The maximum spacing of the horizontal bar (mm) : SWH = 200.00... Concrete rules 9.4.4; It is desirable to be 100 to 300, and the anti-regulation 6.4.4 The minimum reinforcement rate for the wall of a wall. Concrete rules 9.4.4; The earthquake-resistant design should be greater than 0.25, the anti-regulation 6.4.3 1 (strong). Design information: Structural importance factor: RWO = 1.00... Concrete rules 3.3.2 (strong); Level 2 of safety, the design USES the year 50 years, take 1.00 Column calculation principle: there are lateral moves... Normally press [have lateral] for steel structure The overlap of the beams is simplified: not as a new domain... Generally not simplified, large scale columns and different column structures should be considered in high gauge 5.3.4, see handbook Consider the p-delt effect: no... Generally not considered (see output file wmass.out); Concrete rules 5.3.4 items; The rules 3.6.3; High gauge 5.4.1, 5.4.2 The principle of column reinforcement calculation: by single bias calculation... To calculate by [single bias]; The Angle column and the foreign column are checked by [bibias]. The column can be defined by special components, and the program is calculated automatically Net gross area ratio of steel components: RN = 0.85... Used for steel structure Beam protection layer thickness (mm) : BCB = 25.00... The indoor normal environment is greater than 25mm, the protective layer thickness is detailed conc