1000MW发电机线棒温度过高问题的分析及处理.PDF

1000MW发电机线棒温度过高问题的分析及处理.PDF

  1. 1、本文档共3页,可阅读全部内容。
  2. 2、原创力文档(book118)网站文档一经付费(服务费),不意味着购买了该文档的版权,仅供个人/单位学习、研究之用,不得用于商业用途,未经授权,严禁复制、发行、汇编、翻译或者网络传播等,侵权必究。
  3. 3、本站所有内容均由合作方或网友上传,本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺!文档内容仅供研究参考,付费前请自行鉴别。如您付费,意味着您自己接受本站规则且自行承担风险,本站不退款、不进行额外附加服务;查看《如何避免下载的几个坑》。如果您已付费下载过本站文档,您可以点击 这里二次下载
  4. 4、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等,请点击“版权申诉”(推荐),也可以打举报电话:400-050-0827(电话支持时间:9:00-18:30)。
查看更多
1000MW发电机线棒温度过高问题的分析及处理

内蒙古电力技术 2017 年第35 卷第1期 INNER MONGOLIA ELECTRIC POWER 73 doi:10.3969/j.issn. 1008-6218.2017.01.021 1000 MW 发电机线棒温度过高问题的分析及处理 张建红,刘 涛 (东方电气集团东方电机有限公司,四川 德阳 618000 ) 摘要:某电厂1 号发电机定子线棒出水温度和线棒层间温度异常,停机对定子水路进行 了检查,由于水质问题导致线棒堵塞,采取反冲洗及酸洗处理措施后线棒温度高的问题得到 了解决。建议通过改善发电机定冷水系统的水质、加强发电机的保养和检查等措施,可减少 因结垢堵塞造成的线棒温度高的问题。 关键词:1000 MW 发电机;线棒温度;定子冷却水;酸洗;反冲洗;堵塞 文献标志码:B 中图分类号:TM311 文章编号:1008-6218(2017 )01-0073-03 Analysis of High Stator Bar Temperature in 1000 MW Generator and Its Treatment ZHANG Jianhong, LIU Tao (Dongfang Electric Machinery Co.,Ltd., Deyang 618000, China) Abstract :The temperature of the stator rod outlet and the rod layer were abnormal, in No.1 generator in a power plant. As closing down the unit, make inspection to find out the inappropriate water quality caused the winding rod clogging. Carry out the backwashing and acid washing to recover the high temperature of the winding rod. Put forward to improve the water quality of the constant cooling water system of the generator, strengthen the maintenance and inspection of the generator to greatly reduce the high temperature of the wire rod caused by the scaling blockage. Key words :1000 MW generator; wire rod temperature; stator cooling water; acid washing; backwashing; clogging 1 故障概述 下层导线截面积为37.86 mm×49.46 mm 。发电机定 子线棒额定电压27 kV ,总长度超过10 m ,单只线棒 某电厂1号机采用QFSN-1000型水—氢—氢发 160 kg ,是目前国内生产的最长、最重、电压等级最

文档评论(0)

ldj215322 + 关注
实名认证
内容提供者

该用户很懒,什么也没介绍

1亿VIP精品文档

相关文档