激光弯曲陶瓷片的数值模拟.pdfVIP

37 6 V ol. 37 , N o. 6 20 10 6 CHINESEJOURNAL OF LASERS June, 20 10 : 025 87025( 2010) 06163 105 激光弯曲陶瓷片的数值模拟 胡玲玲 周建忠 杨小东 黄 舒 ( , 2120 13) A BA Q U S , Al O 2 3 ; , ; , , , , 0 . 18~ 0 . 3 1 mm ; ; A l O ; 2 3 T N 249 A doi: 10 .3788/ CJL2010 3706 . 163 1 Numerical Simulation of L aser Bending of Al2 O3 Ceramic Slice Hu Lingling Zhou Jianzhong Yang Xiaodong Huang Shu ( School o M echan ical Engin eer in g , J ian gsu Un iver sit y , Zhenj ia n g , J ia ngsu 2 12013, China ) Abstract A 3 thermalmechanical finite element model for laser bending of Al O ceramicslice is establishedwith 2 3 the ABAQUS code. Based on the fields of temperature, stressstrain and displacement from the simulation, the forming mechanismof laser bending of ceramicslice isinvestigated. The simulatedresults of different thicknessesare comparedwith each other, aswell asthe influence of specimen thickness onthe fields of temperature, strainstress and displacement. It is observed that as the thickness increased, the temperature on the bottom surface may not reach the plasticturning temperature and the magnitude of the surface residual stress may increase. Through the analysis, it is foundthat the optimum thickness is between 0 . 18 mm and 0. 3 1 mm under the specified processing parameters. Key words laser technique; laser bending; Al O ceramic; numerical simulation 2 3 1 [ 8~ 10] , , [ 1]