基于matlab的语音旌旗灯号录制采集和剖析的法度模范课程设计(国外英文资料).docVIP

基于matlab的语音信号录制采集和分析的程序课程设计(国外英文资料) directory The first chapter of the Matlab curriculum design proposal is proposed The main content of the first section and the basic requirements are 1 One main content 1 Two basic requirement one Section 2 design plan 1 The second part of the speech signal and its noise are two Section 1 speech signal 2 A speech signal acquisition 2 The time domain of the second speech signal and the spectrum analysis 2 The second part of the speech signal is noise and analysis 4 A speech signal has a noise of 4 The selection of the filter is 8 The basic concept of the first filter is 8 Function 8 of a filter Two, four basic filters 9 The basic knowledge of the second digital filter is 9 An FIR digital filter 9 Two IIR digital filter 10 The selection of the digital filter in the third section is 11 Comments 12 13 refs The appendix 14 The proposal of the first chapter of Matlab curriculum design The main content and basic requirements of the first section Primary content After recording a speech signal, a voice signal is collected in MATLAB software to rewind voice signals and draw the time domain waveform and spectrum of speech signals. The noise is added to the audio signals, and the signals are played and the time domain and the spectrum analysis are drawn. By comparing the time domain and the spectrum graph of the noise before and after the noise, the analysis discusses the filter that is used to filter the noise. Basic requirement Learn to use MATLAB, master MATLAB programming method; Master recording of speech signals in Windows environment; The method of collecting speech signals in MATLAB environment; Using the randn function to add gaussian random noise to the original signal; The signal is analyzed and processed by MATLAB. Section 2 design plan Record a speech signal; Then, use the wavread command in MATLAB to read the voice signal and assign it to a vector. And its a common signal, the Fourier transform of the Fourier transform. A rand