延长组聚积类型(国外英文资料).docVIP

延长组沉积类型(国外英文资料) Extended group deposition type 1. The fluvial facies It consists mainly of the lumbar sandstone of the river and the dust rock and sandy clay of the river. In this case, the low-angle braided river deposits are fine - medium-grained sandstone, the bottom is thicker, the top is thinner, and the thickness of the layer is 4-5m. Wash surface flat, at the bottom of the groove, tabular cross-bedding, inclination of 5-10 °. The sand bodies of different sedimentary cycles are cut and folded, forming blocks of sand that are more than 30 meters thick; The natural potential is in a box, and the ratio of the channel sand to the river is greater than two to three. High sinuosity meandering river deposition of fine grained sandstone, lateral accretion of a typical sequence, wash surface at the bottom of the ups and downs, sand body are dips top flat section, as are graded cycle; The lower deposit is coarse, the development of large slab, groove, and wave cross-bedding. The upper sedimentary detail, the development corrugated layer and horizontal bedding, the common plant root and the upright wormhole, the mud rock is rich in the plant fossils, and the coal seam or the coal line; The ratio of channel sand to river deposit is closer to 1. 2. The delta facies The elongation of the delta is a constructive bird, and the water and underwater sediment are characterized by distinct river deposits. The water diversion channel is interwoven with the estuary dam, forming the delta composite sand body. (1) the delta plain It includes shunting channels and river bank deposits. Among them, the distributary channel deposit is given priority to with fine - medium grained sandstone, belongs to the limitations of filling sedimentary sequence, minerals and high textural maturity, bedding structure of small size, and size of sand body, bottom concave head flat, in section plane strip, dendritic. The river floodplain was deposited as a thin layer of fine silt-silvery sand, a sandy so