18米跨度梯形屋架(国外英文资料).docVIP

18米跨度梯形屋架(国外英文资料) Steel structure design 8-27 2013 The instructor 18m span ladder steel roof frame With five Student id 1. The design data The length of a workshop is 180 m, and the column is 6 m. There are two 20/5t intermediate working cranes in the workshop. Calculated temperature above 20 ℃, seismic fortification intensity of 7 degrees. Adopting the 1.5 x 6m2 prestressed reinforced concrete roof slab, 8cm thick foam concrete insulation layer, coil roof. The snow load is 0.4 kN/m2, the ash load is 0.75 kN/m2, and the frame of the roof is on the reinforced concrete column, the column section is 400 by 400, and the concrete mark is C20. The design of the roof is required. Roof form and load Without the scheme of the purlin house, the slope of the roof is 1/10, and the roof of the slope trapezoid is adopted. The roof computing span is L0 = l-300 = 17700mm, the end height is H0 = 2015mm, the middle height H = 2900mm. According to the calculation temperature and load properties of the construction area, the steel is chosen from q235-b, and the electrode adopts E43, which is manual welding. Permanent standard value: 2 felt 3 oil and 1 pebbles 0.35 kN/m2 Find the flat layer (2cm thick) 0.40 kN/m2 Foam concrete insulation (8cm thick) 0.50 kN/m Prestressed concrete large roof slab (containing seam) 1.40 kN/m2 The steel roof and support itself are 0.12 + 0.011 times LkN/m2 The plumbing equipment weighs 0.10 kN/m2 Live load standard: 0.70 kN/m2 Snow load standard: 0.50 kN/m2 The standard value of the ash load: 0.75 kN/m2 Load internal force calculation 1. Load calculationPermanent load standard value 2 felt 3 oil and 1 pebbles 0.35 KN/m2 The leveling layer (2cm) is 0.40 KN/m2 Foam concrete protective layer 8cm 0.45 KN/m2 Prestressed concrete large roof slab 1.. 40 kn/m2 The steel roof and the support value are 0.12 + 0.011 * L KN/m2 = 0.318 KN/m2 The plumbing equipment weighs 0.10 KN/m2 Total 3.018 KN/m2 Live load: 0.70 KN/m2 snow load: 0.50 KN/m2 soot load: 0.75 KN/m2 Desi