2011年造价员《安装工程》试题解析(1-4)(国外英文资料).docVIP

2011年造价员《安装工程》试题解析(1-4)(国外英文资料) Everybody BBS, Http:// In 2011, the cost of the installation project was resolved (1) If an investment project is feasible, (). A.N pV is greater than the state B.N pV acuity 0 C.N pV business acceptable level D.N pV initial investment Answer: B Analysis: this is an understanding of the concept of net present value. Only when NpV is greater than 0 is possible. In the answer, only B satisfies the theory of the net present value, A. C.D is not correct. The following are the indicators of the static evaluation of the investment plan. Return on investment Internal rate of return C. the net present value rate D. net annual value Answer: A, The purpose of this problem is to assess the understanding of static evaluation indicators. Only the static and dynamic indicators can be understood to determine which is the correct answer. Therefore, the examinee should be accurate to each concept. Static indicators dont take into account the time value of the money, only the return on investment is a static indicator. The () method should be adopted when choosing a mutually exclusive solution over a lifetime. A. differential internal rate of return B. the independent project C. net annual value method D. efficiency index Answer: C Analysis: the subject appraisal is a problem about investment projects economic benefit evaluation method, for the life of different mutexes, can pass all the alternatives are calculated respectively in net cash flow of an equal value (AW), AW acuity 0 and AW so much as the optimal solution. So C is the right answer. In the case of a plan comparison, the () method is usually given priority to. A. dynamic evaluation B.The static evaluation C. net annual value method D. the net present value rate Answer: A, Analysis: in the case of project comparison, the dynamic evaluation method is the main method. In the preliminary stage of the plan, the method of static evaluation can be adopted. The net year value belongs to (). A. dyn