橡胶密封件隔声性能测试实验室的设计(国外英文资料).docVIP

橡胶密封件隔声性能测试实验室的设计(国外英文资料) In 2009.. 5 valves Period 5 (period.) Guangxi light industry.. GuANGxIJ0uRNAL 0F LIGHT [NDusTRY resources and environment Design of rubber sealable insulation performance test laboratory Zhang aihua, li zhiyuan. Hefei industrial university, anhui hefei. 230 0009). 【 abstract 】 according to the request of rubber seals production enterprises, combined with the technology at home and abroad, the reverberation chamber and the design of the anechoic chamber, establish an acoustic laboratory, from total The test room, the ventilation room and the cutting room were designed, and the composition of the test system was briefly summarized. The indexes of various aspects have been certified and can be used. [keywords] silence room; Reverberation chamber [Chinese graphic classification] x839.1 [document id] A 1 the introduction Nowadays, all countries in the world are concerned about the noise pollution of cars, cars Noise pollution mainly affects two areas: one is the effect on the outside environment, the other a One is the effect on the interior of the car. To this end, China has promulgated cars speeding up cars Outside noise limits and measurement method (gb1495-20o2), car fixed noise limit Value.. (GB1617O, 1996), the method of noise measurement in cars. (gb18697-20o4) is a series of measurements that are equivalent to international standards Control standards in order to control the noise of the car. And the car steering gear and other seals are Reducing the noise in the car is an important part of the car Effective noise reduction measures. In order to effectively improve the sound insulation performance and control technology of rubber seals, expand Market share, improve competitiveness. It is necessary to enter into rubber seals such as steering gear Perform acoustic performance testing and set up an acoustic laboratory as the development site. In this In the background, the acoustical performance measurement laboratory for rubber seals in th