第二章化工设备常用的表达方法(国外英文资料).docVIP

第二章化工设备常用的表达方法(国外英文资料) In this paper, by czhk370784 contribution Powerpoint documents may be a poor experience at the WAP end. It is recommended that you choose TXT, or download the source file to the native view. The second chapter expresses the common method of machine parts See figure 2.1 The basic view is formed? Main view? Vertical view? The left view? Right, right? Looking up from the bottom up? The rear view is projected from behind The spread of six projective planes Look up the main view Looking down The projection of the view of the six faces corresponds The upper right eye view of the left side of the left side of the left side of the left side of the left eye view Still abide by three? Measure the corresponding relationship: still abide by the three equal law bearing corresponding relation:? Azimuth correspondence: apart from the rear view, apart from the rear view, near the main view is the back of the object and the front of the object. In the back, away from the main view is the front of the object. Six views are not used, when does illustrate, not six views are used, in the expression object Six views are not using quantity should be according to the actual situation. Does when a shape in a view in the parts have tables to clear, and the solid line, if this part in other see clearly, and for the solid line, if this part in other visual projection for the dotted line in the figure, projection for the dotted line in the figure, at this time the dashed part can save a little. Second, to view A view that is freely configurable to the view B, C, E, C, F, F, F, D, E Configure the base position Free configuration Specified above to view the letters, near the corresponding view using the arrow Above to view the letters, indicate the projection direction, head head indicate the projection direction, and with the same letters. A partial view is a view of a portion of the object that is projected onto the basic projection. The view of the projection of the shad