加气混凝土砌块墙面抹灰防开裂办法(国外英文资料).docVIP

加气混凝土砌块墙面抹灰防开裂措施(国外英文资料) Gas and concrete block wall plaster for anti-cracking measures Aerated concrete has the advantage of light unit weight, the effect of heat insulation and sound insulation performance is good, construction is convenient and save the land resources and environmental protection advantages, is a kind of framework and other central African main wall structure of lightweight partition wall materials. This paper presents the reasons for the cracking of the wall of gas concrete masonry, and puts forward the improvement and prevention measures. The main reason for the painting of air drum and cracking of the gas concrete block wall Effect of gas concrete block technology characteristics The contractions, especially the contraction of 28 days before age, are not only large, but also fast. The water content is high and the dry gas concrete block is easy to absorb the moisture in the dust layer, which affects the strength of mortar and the bonding force of the wall. (3), wet sex difference, guide the bibulous rate of aerated concrete is only 1/4 ~ 1/5 of the clay brick, when the wall moisture content is insufficient, new moisture from the plastering mortar layer will continue to be aerated concrete block to absorption, cause the loss of mortar strength and cohesive force, floated coat pulverization, empty drum, fall off. (4) long, wet, aerated concrete block surface moisture evaporating faster, slower internal moisture to evaporate, masonry and plastering surface moisture evaporating out of sync, drying shrinkage deformation difference is big, make the plaster layer shrinkage cracking, empty drum. 5], aerated concrete block cutting surface is designed, and a loose particles, if not clean enough before rendering, the isolation layer is formed between masonry and plastering layer, because of cohesive force drops, and appear empty drum. [6], aerated concrete block of drying shrinkage is bigger than the plastering mortar, changes in temperature and humidit