强制性条则检查通用表GJ2.3.1(通用表)(国外英文资料).docVIP

强制性条文检查通用表GJ2.3.1(通用表)(国外英文资料) Inspection records of internal defect detection report of the secondary seam inspection record GJ2.3.1 (general watch) (the mandatory regulations check the general table) The name of the project Project name The steel structure welding Check the project Report on internal defect detection of the secondary welding system The total package units Subcontractors shall Construction drawing no. Inspection area standard The construction unit self-check the record Supervision (construction) unit acceptance record Report on internal defect detection of the secondary welding system Weld defects such as surface must not have crack, flash, secondary porosity, slag, arc pit shall not be surface crack, scratch, can not have bite edge, arc welding defects such as full The defects in the internal defects of the inner and secondary welding of the two sides of the system are no porosity, slag, arc pit crack, arc chafing, biting, unsoldering Construction unit Their conclusion Quality inspector: Construction unit project technical director: (date) (month) (year) Supervision (construction) Unit acceptance conclusion: Supervisory engineer (director of construction unit project) : the date of the year Steel crane girder (truss) deflection inspection record GJ2.3.1 (general watch) (the mandatory regulations check the general table) The name of the project Project name The steel structure welding Check the project Deflection of steel crane girder (truss) The total package units Subcontractors shall Construction drawing no. Inspection area standard The construction unit self-check the record Supervision (construction) unit acceptance record Deflection of steel crane girder (truss) Crane girders and crane trusses should not be scratched Precision of crane beam installation The crane beam and the crane truss have no downwarping phenomenon The crane beam installation accuracy meets the requirement Construction unit Their conclusion Quality inspector: Construction