接地网的造就(国外英文资料).docVIP

接地网的建设(国外英文资料) So the product of this kind of raw material belongs to environmental protection product. Good ground technology in different geological environments The production of underground network in the high mountain area The general mountain area is the difficulty that the ground network makes, this article USES the method that builds a well ground; (mainly on the rock) It is not impossible to make a network of rocks on rocks. Under ground topsoil drilling drilling way phi 200 * 2000 ~ 3000 mm (depending on the environment), mashed formation rock blasting way form at the bottom of the aperture, pouring filler (sintering type), vertical in non-metal earthing body after adding polymer drag reduction agent properly after adding water, sink in water add water after 3 ~ 4 hours after polymer drag reduction agent and right amount of filler in the is 800 mm from topsoil to consolidate, at this point the vertical laying grounding body and began laying level ground net; Level ground with more than 35 square copper skin after appropriate coating conductive adhesive and do at 500 mm from the surface level cable slot, slot width of 200 mm, online slot casting anhydrous state of polymer drag reduction agent and a moderate amount of filler to brush good conductive adhesive cable after buried soil compaction in accordance with the grid shape; Grounding network grounding distance can be according to the distance of 1.5 x 3.0 m x 1.5/3.0 installation, each cross intersection as a vertical grounding body join point, finally, the ground surface with fine soil burying. The production of underground network under geological conditions such as the fossils of saline wind In saline soil contains high corrosive substances, so in this environment is not using metal materials as earthing body, non-metallic materials are well suited for use here, here are the expanded graphite body in saline wind preparetions of fossil geological method. Wind fossil kinds of geological conditions is ma