搭接焊(国外英文资料).docVIP

搭接焊(国外英文资料) Technical background record JJ lu an 005 The name of the project Lu xing mine administrative office building Construction unit The 10th project department of shandong huaxin construction engineering group co., LTD Clarificaiton parts Sixth floor beam The name of the process Lap welding Summary: the relevant data, equipment preparation, quality requirement and construction technology of the welding Content of the disclosure: First, preparation for construction (1) working conditions The welder must hold the post of evidence. There should be safety protection, fire protection, ventilation measures, prevention of electric shock, fire, poisoning and burn. Before the formal welding, each welder should be able to handle the three parts of the steel bar that are ready for arc welding in the project Simulate specimen, do tensile test. After the test is qualified, the construction operation may be taken. (2) material requirements Steel bar: the level of the steel bar, the specification must comply with the design requirement, the production material proof and the retry report after approach. The imported steel bar should also be tested for chemistry and weldability, and the results meet the requirements. There is no crack, rust and oil. Steel: the steel plate for the embedded parts shall not be corroded or deformed. 3, electrode: E50 type No cracks, stomata, and concave and convex defects in the skin of A drug, and no visible eccentricity is visible to the naked eye. During the welding process, the arc should be stable, the skin of the powder melted even, and the whole thing fell off. C welds must be dried before using. (3) tools The main tools are: welder, cable, electrode holder, face mask etc Second, quality requirements The appearance quality requirement of the steel arc welding joint The surface of the weld shall be flat, and shall not be dented or welded. Project (major) Technical director Disclosure of Accepting clarificaiton Note: this record is in dupli