收集弊病信息大全(国外英文资料).docVIP

网络故障信息大全(国外英文资料) Or use the Ping and PathPing test network connection in chapter 19 of the Microsoft Windows XP Professional Resource Kit document. Check the event log for items related to the network card or the items associated with the connection. For other information, click the article number below to see the corresponding article in the Microsoft knowledge base: How do you view and manage event logs in Windows XP event viewer Check if the network adapter is listed on the Microsoft hardware compatibility list (HCL). Check for other computers that insert the same default gateway in the same hub or switch. If the computer doesnt have a network connection problem, it means that the network adapter on a particular computer might fail. If this is the case, update the network adapter driver to the latest version. Contact the suppliers of each motherboard and update the BIOS. Some network adapters are incompatible with motherboards or BIOS versions. Get the latest version from the vendors website or contact your hardware vendor. Check the public Settings for network adapters and uplink hardware (hubs or switches). Ensure that all complementary network resources (network adapters, hubs, and switches) are set to the same speed and duplex level. If the media type is set to autosense, autosensing, autodetect, or Auto Select, make sure that all components are properly automated. For some switches, the Auto set will allow it to use semi-duplex Settings. You need to force the switch to use full duplex. Reset the switch, restart the client, and test connectivity. Place the client and server on a passive hub. If communication can be recovered, the problem may be caused by an incorrect network switch configuration. For more information on how to configure the device, contact your hardware vendor. The network adapter for the computer with the connection problem is manually set to half duplex and low speed. Connect the system to a configuration for the rate of 10 - Mbps half-dup