水泵PID操纵器应用仿单(国外英文资料).doc

水泵PID控制器使用说明书(国外英文资料) The ipc-301 (original rwv-1) pump PID controller USES the instruction manual The ipc-301 (formerly RWV -1) is a special controller for water pump constant pressure control. There are seven modes of control; With four constant water pressure control values, the control value can be switched at any time. It has two 0 (4) ~ 20mA analog input, all the way 0 ~ 10V analog input, can be used for single analog quantity input and differential analog input control. The output of five circuit switches, four kinds of hydraulic pressure (differential pressure) state, the state of the lower frequency, with PLC, can realize the switch of frequency converter. One. Panel and output terminal definitions 1. The panel show Rwv-1 pump PID controller Common parameters and meanings Shanghai lisheng industrial control equipment co., LTD L1 L2 L3 L4 FUN ENT ▼ Bring about display Indicator light Parameter table Press key The panel figure Monitor: the display has four digital tubes; In the normal display status when the first display to show the value codes, display for H after said three input pressure value (or the differential values), shown as F said after three display output frequency values (i.e. display output voltage value: 10 v corresponding to 50 hz); The first display parameter is shown as the parameter value in the parameter modification state; When the parameter modifies state, the 10s is automatically switched to normal display status. Indicator lights: L1, L2, L3, L4 for output frequency, input pressure status: L1: the bottom of the water pressure; L2: lower pressure limits; L3: lower frequency; L4: upper water pressure upper limit. Key: FUN to switch keys The direction key is used for the modification of the parameter values when the parameters are modified, and the control mode is used to control the output frequency control in the mode of manual mode. ENT in the state of parameter modification to modify parameter save key, long press this button to di