浅析剪力墙内预埋配电箱(国外英文资料).docVIP

浅析剪力墙内预埋配电箱(国外英文资料) Shallow shear wall embedded power distribution box Shan jian group first limited company announced the call Abstract: to set up the power distribution box in the shear wall, and the construction process is programmed and standardized. Keywords: once formed, box body positioning, use template correction, position reinforcement, 3 side. With the continuous development of economy in our country, the shear strength of the structure of the high-rise building gradually become the mainstream of construction, high-rise buildings, large and small, more than one hundred units, distribution box for construction equipment installation practitioners, how to streamline in the shear wall embedded distribution box is bound to become a key issue. Traditional installation method is the main body construction, made wooden frame according to the geometry size of distribution box reserved hole, after being main body construction finished, demolition of wooden frame, box installation, repair the mouth of the cave, there are many defects in the installation process. Make wooden frame, is bound to increase additional cost, and due to the stability of the wooden frame, poor impact resistance, easy to deformation during concrete casting, caused the reserved hole deformation, need to rebuild. Installing a box body, to take over the difficult, difficult to meet a hole a tube, pipe line up, even to use welding open hole, long open hole, cause the quality defects, after the installation is subject to civil engineering units to cooperate for the hole to fill repair, also left metope quality hidden trouble. Throughout the process, it takes time and effort to ensure the quality of the installation. The difficulty of pre-burying the power distribution box in the shear wall is that the demand for success rate is very high, and it is almost impossible to adjust when there is a problem. Industry in recent years there have been many about embedded in the shear wall distribution box,