灌音室的简单隔声设计(国外英文资料).docVIP

录音室的简单隔声设计(国外英文资料) Sound recording studio design Simple acoustical design One, room overview The studio is in a high-rise building with a basic size: X width X height = 3.8 X 3.1 X2.6 m. The outside of the recording room is three sides of the corridor, one side is the control room, the control room and the recording room are designed with a soundproof window. The design has a soundproof door into the soundproof room. The studio is upstairs for the outer unit, and downstairs is the unit room. Design requirements analysis The studios main application is language dialogue recording. The acoustics of the recording room for language are: 1, reverberation is short, usually between 0.3 and 0.4 seconds; The reverberation time frequency characteristic curve is as flat as possible, the reverberation time of different frequencies should be the same; 3, to prevent acoustic defects in the room; Control noise, minimize the noise inside the room, and isolate the noise from outside the room. Design principles and design indicators The reverberation time is reasonable. The medium frequency 500Hz reverberation time is 0.3 s, the low frequency 63Hz - high frequency of 8KHz is equal to the same as possible, the design should be controlled at 0.25 s - 0.35 s. In order to ensure reasonable reverberation time, it is necessary to install the sound absorbing material in the side wall, smallpox and the ground in reasonable area. Nearly 2, room size may conform to the harmonic series, namely 1:1. 2:1. 5 or so, to make the room nearly can reasonable distribution of normal way prevent mergers, acoustic dyeing phenomenon. At the same time, the spread structure of smallpox and the wall of the wall is made, so that the sound field of the room is diffused as evenly as possible to obtain the sound diffusion sound field. When recording, there should be enough quiet background noise. The sound insulation of smallpox, ground and side walls should be higher than 55dB. The sound barrier (acoustic brake