火床炉炉膛内流淌阻力特征剖析(揭橥稿)(国外英文资料).docVIP

火床炉炉膛内流动阻力特性分析(发表稿)(国外英文资料) The characteristics of flow resistance of fire bed furnace arch area are analyzed Miao zhengqing: born in 1961, associate professor of dynamics and energy of Shanghai jiaotong university, PhD student at xi an jiaotong university. Dou wenyu huishi xu (xi an jiaotong university, 710049) Abstract: according to the momentum integral equation of boundary layer combination arch zone modeling test of the arch area velocity distribution characteristics, fire bed furnace arch surface frictional resistance after carried on the theoretical derivation, the calculation expression. Example calculation shows that the fire bed furnace arch after maximum differential static pressure in the area is mainly composed of potential flow in the process of confluence area of dynamic and static pressure caused by transformation, the wall friction loss, by contrast, completely negligible. The theoretical significance is that the rational furnace arch design not only does not increase the pressure of the furnace, but also the partial negative pressure of the furnace. This conclusion is contrary to the habit of increasing the increase of the arch and increasing the pressure tendency of the furnace, and it is helpful to dispel the suspicion of the furnace arch reformation. Its practical significance lies in: quite a lot of boiler burning due to take positive pressure chamber of a stove or furnace black, burn out the phenomenon of oven door, through the reasonable design of furnace arch and solved smoothly. At the same time, this paper also provides the theoretical basis for the aerodynamic aspects of the furnace arch. Keywords: fire bed furnace, furnace arch, flow, resistance 5 y one L2 L1 4 3 2 Lx H. Y hx o x L Industrial boiler industry has generally recognize the fire grate furnace combustion is the key to the furnace arch, the appropriate extension and lower furnace arch (mainly for the arch) should be the principle direction of furnace arch design and transform