结构地质学模拟题(国外英文资料).docVIP

构造地质学模拟题(国外英文资料)China geological university (Beijing) continues education collegeA simulation of tectonic geologyOne, single choice questiononeThe concept of stress BA. The so-called stress is the internal force of the unit areaC. stress is the force of the derived particle that is not produced by an external force. The stress is the sum of the forces of the object2The type of tectonic type that is composed of two groups of positive faults that are closely parallel and tilted towards the opposite direction is AA. ground graben b. ground c. faulted basin d. rift valley3The basic features of the alpine pleats do not have AThe flap of the wing is very slow, and the deformation is very slight and very largeB. a series of pleated folds are shown in a strip of fabric, and the direction of all the folds is essentially the same as the extension of the tectonic beltC. the entire band is covered in a continuous shape with a continuous pattern, which is full of the same developmentD. different levels of wrinkles tend to be composed of large, complex anticlinal and synclinal oblique, along with imbricate faults4What is the difference between native and secondary constructsA. native tectonics develop in A more deformed environment, and secondary structures develop in A less deformed environmentThe primary structure is developed in a less deformed environment, and the secondary structure is developed in a more deformed environmentThe primary structure is produced simultaneously with the surrounding tectonic environment, while the secondary structure develops later than the tectonic environmentThe primary structure develops later in the surrounding tectonic environment, and the secondary structure develops along with its tectonic environment5Mylonite is AA. High temperature and stress in the mineral are formed by plastic deformationB) a rock formed by a hard rockC. brittle crushing and grinding6The output of the reverse thrust and the formation of the upper and lower strata is cal