STUDYON3DTOOLCOMPENSA_省略_ALGORITHMFORNCM.pdf

STUDY ON 3D TOOL COMPENSATION ALGORITHM FOR NC MILLING ZHAO Bo, YE Bangyan College of Mechanical Engineering, South China University Of Technology, GuangZhou, 510640, China Keywords: Tool compensation, CNC, vector compensation, In 2.5-axis machining, G41/G42 NC codes are always used to tool path, 5-axis machining. compensate tool radius, many low-end NC controllers have the function[2]. If the function of 3-Dimension tool Abstract compensation is need, there must be a more advanced NC controller to offer vector compensation mode, but there is no Modern CNC machining centre are often equipped with further research on the field at present. On the other hand, the powered tool magazine to enable radial or axial drilling, post-processing software sailed in the market only offers the tapping or milling operations. If the machine tool is equipped function of 2-Dimension tool vector compensation, the with a rotatable and controllable C axis (spindle), milling for manufacturers that sell 5-axis machining center such as complex curved surface can be implemented. In this kind of CINCINNATI, Shin Nippon Koki and SNK, just offer special NC machining, 3D tool compensation is an important way to post-processing program that can output the multi-axis 3- get an ex