三星总线进入方法(国外英文资料).docVIP

三星总线进入方法(国外英文资料) 2005/5/13 The samsung bus enters the method Samsung color I2C bus service entry Note: in the debug to ban the use of the P bring about, pieces P button to enter Option byte (Option), and change its value, its value is changed, there will be grating one bright one dark, press POWER key cant turn it off phenomenon.    when use keys into the maintenance or factory pattern, the whole process need to be finished within 5 seconds. Applicable machine: (SCT12A/SCT12B machine) Enter maintenance mode under maintenance mode (1) in standby mode, P.S. td-help-sleep POWER ON (2) or by the remote controls FACTORY maintenance key (which is not used in the remote control board) Applicable models: Beijing 2103G. 2110G. 2112G. 2120G. 2120G. 2163G. Enter the maintenance and adjustment status of factory mode (1) use the button ON the remote control to enter the factory mode: PICTURE - OFF - p. std-help-sleep - PICTURE ON (2) use the channel key and the volume key (+ / -) to move the cursor and select a tuning parameter. (3) adjust the size of the parameters using the volume key (+ / -). Applicable models: Beijing 2505G. 2566G. 2903G. 2911G. 2912G. Maintenance and adjustment in factory mode (1) use the following order to operate the button on the remote control and enter the factory mode: PICTURE - DISPLAY - P.STD -.mute - PICTURE ON (2) use the channel key and the volume key (+ / -) to move the cursor and select a tuning parameter. (3) adjust the size of the parameters using the volume key (+ / -). Applicable models: Beijing 2163. 2164; Samsung cs339z.cs5039z.cs5066kb. CS5366KB. CS5366KB (SCT11C) The process of adjusting the pattern Click ON the HIDDEN ON the keyboard or STAND BY - P.S. td-help-sleep - POWER ON 2. The adjustment method Press the VOLUME (+ / -) key to go into the adjustment mode, and use the CHANNEL key to go into the adjustment mode and select the adjustment project using the CHANNEL key Applicable models: Beijing 2980 p, 2982 p, 2982 h; Samsung CS72