《舰队指挥官》常见问题(国外英文资料).docVIP

《舰队指挥官》常见问题(国外英文资料) The fleet commanders FAQ: Q: why cant I reload the game next time after I have saved my memory? A: the fleet commander has a large amount of information. So be sure to press the P key in the memory disk and save it in the pause state Wait a little longer to finish the task, so you can load the task again. Q: why did my plane run out of gas soon? A: the plane has a different status during the flight (fight, patrol, identify the chase, return to base...). It is. Its different in airplanes The speed of the flight is different. Depending on the speed of the flight, the amount of fuel consumed by the plane is different. its In the middle, when the plane is in a state of war, it will fly very fast, but it will also burn fuel at the same time. So the right thing to do is to fly When attacking the enemy, if the distance is still far away, dont use fight, better transfer, get in range and fight. Q: how to do it? A: generally speaking, it is possible to use the medium-frequency active sonar of surface vessel, the carrier helicopter and the anti-submarine aircraft to conduct anti-submarine. If you dont Looking at the enemy submarine to attack your surface vessel, it is best to open the mid-frequency active sonar for surface ships. But turn on the mid-frequency active sonar It also makes the enemy submarine find you, so its best not to turn on mid-frequency active sonar. Otherwise, the enemy submarine will be found in you It found you before. To search for enemy submarines on a large scale, anti-submarine aircraft and helicopters are needed. Anti-submarine planes and helicoptersThere is a search option. When using, select the search function first, and then the mouse becomes a small hand, holding the left key, using the small hand Drag an appropriate area on the campaign map, and the anti-submarine plane or helicopter will start searching for enemy submarines in this area. search It is recommended that you turn on active sonobuoy. In general, anti-submarine