一建笔记(国外英文资料).docVIP

一建笔记(国外英文资料) 2014.7.2 To purge the medium The nominal diameter is greater than or equal to 600 liquid gases. The nominal diameter is less than 600 liquid clean The nominal diameter is less than 600 gas clean. 06:48 Steam pipes to clean up. No steam cleaning shall be used for non-thermal piping. The general rules of purge 1, the pipeline pressure test is qualified, the construction unit organization blows the washing, the braiding plan. Check pipe branches and hangers and not allow the equipment to be blown off. 3, valves in pipeline pressure test dont participate in the purge, purge valve to protect it, before the former does not install the orifice plate, flange connection purge of important valve, throttle valve, regulating valve, safety valve, instrument, welding, instrument should be flowing through the bypass valve fire off valve head seat family cases. 4, the sequence manager, the branch, the pipe. Pipeline pressure test 1 \ 1, the pipeline pressure test should be in heat treatment, nondestructive testing, after hydraulic or pneumatic test, cannot hydraulic can not do, do pressure reduces the design institute to agree. Brittle material does not do air pressure test. Hydraulic pressure test Clean water is the medium, and chlorine ion in water is less than 25ppm 2, the temperature is not lower than 5 °, higher than the corresponding transformation temperature of metal material, it is strictly prohibited to material test temperature close to brittle transition temperature. The design pressure of steel or non-ferrous metal pipes is 1.5 times, not less than 0.4 Mp. 4, test pressure 10 minutes, descend to design pressure to stabilize 30 minutes, no leakage, no reduction. No pressure handling. Pressure test Air or noble gases are non-toxic, non-flammable, and dry gases. Pressure test was designed to design pressure 1.15 times. Before the experiment, the experiment should be carried out in air, and the pressure was 0, 2 Mp 3, test pressure rose to 50%, check the prese