CASS7.0计算两期土方题目(国外英文资料).docVIP

CASS7.0计算两期土方问题(国外英文资料) CASS7.0 meter calculate two period soil party Measurements are often calculating earthwork problems, two phase of earthwork calculation is one of the distinctive features of CASS, earthwork balance construction process, especially the area or measured the two results, it can be a one-off excavation earthwork quantity for us to calculate the same area of fill, is very convenient. In order to give you an in-depth understanding of the methods of CASS6.1 calculation of two soils, this question is discussed to discuss learning. ???? In general, the following three methods can calculate two periods: ????????? Between the two sections of the line ????????? 2, the DTM method is calculated in two terms ????????? Square grid (design surface for triangle) Triangulation method, grid method is a common method of section method is provided to party as volume basis, generally three methods to calculate the gap is not going to more than 2% - 5%. Triangle method count: click the contour line, choose to establish DTM or surface DTM perfect Click create DTM and display: ??????????? The selection is generated by the surface elevation point, determined. Notice the text in the lower left corner, and click the enter button. When you select the boundary line of the area, you will automatically form the triangle network, as shown in the picture: After the triangle network is formed, click on the DTM method in the application of the project to calculate the amount of soil, and select the triangle net on the graph, as shown here: When selected, the following image will appear: Note the tip at the bottom left: enter the level-field height (which is the depth of the design, usually with a depth of 0.5 m), which will be displayed in the lower left corner. The square measure is done. ???? Square grid method calculating square method: the square grid method calculates the square method to calculate the quantity first, click the project to use the mouse down, select the spe