CEMS日常保护(国外英文资料).docVIP

CEMS日常维护(国外英文资料) Maintain calibration In order to ensure that CEMS - the system can work long and reliably, the CEMS - system needs to be maintained and calibrated periodically. CEMS - 2000 - s system maintenance are some simple inspection and operation, our engineers in system after the installation and debugging, will be on the scene of the instrument to carry on the detailed training in the operation staff. Daily maintenance Daily maintenance is critical to maintaining and improving the operational efficiency and service life of CEMS - systems. There are several aspects of the daily maintenance project: ? A zero calibration of the OMA 2000 spectra gas analyzer per week; ? The periodic calibration of the gas analyzer of the OMA 2000 spectrophotometer is recommended, and the range calibration period is three months, and the specific calibration period depends on the operating condition. ? Instrument should be paid attention to check every day, between the smell of the air, smell is found, immediately open the door and window ventilated and check whether pipeline leaks, electrical components have overheating and burning phenomenon; ? Check whether external pressure is normal and if not normal, check whether the jet pump and probe are blocked. ? See if the reading of the machine, instrument and temperature controller is normal and whether there is any indication of failure. If not normal, first check if conditions change, such as the condition of no change, to a calibration of instruments, such as is not normal, please contact our customer service department; ? Check the flow rate, temperature and pressure parameters of the inspection machine. ? Check if the pressure of the instrument is normal and if it is not normal, check if the gas connection is leaking. ? Check if the gas circuit is blocked or if the solenoid valve is damaged, if damaged, please stop and replace the solenoid valve in time. ? Change filter cartridges periodically according to the usage; ? The ma