htc屏幕调剂(国外英文资料).docVIP

htc屏幕调整(国外英文资料) Yesterday, I dont know why my S900C suddenly couldnt make the screen, screen after the adjustment, into an infinite loop, guess may be a software failure, willy-nilly, flash, unexpectedly, after enter the system for the first time, or into an infinite loop, last night on the dormitory network. In the morning to the Internet cafe, checked the, better solve the problem of the drift of the screen, will now solution to re-post, have the same problems in the top, to the benefit of the vast majority of the oil! The PPC screen drift results in the adjustment of the screens death loop and the inaccurate and perfect solution of the touch-screen location I have a P3470 chunghwa telecom version, with good, in the office a few days ago to see a laptop screen film others dont, take a look at his film is a bit old, PPC impulse want to cut a piece to the PPC change. So measure size, cut off the paper knife, peel off the old film, carefully attach the new film, and then find out the cup, the touch screen click doesnt reflect... Maybe its time for me to peel off the old membrane and the knife hurts the touch screen, maybe its a bit heavy when it comes to the new membrane. Remove the film from the new post and notice that the click is not accurate, the closing point in the upper right is not... Immediately go into Settings, adjust the screen, and find that youre in a loop, unable to complete the exit. This adjustment screen has a shortcoming, Microsoft is no exit button, do not do the screen Settings will not be able to quit, have been let you cross cursor point on the screen. The battery is switched on. The thought of a reduction may be solved, and it is hard. This is even worse,Mobile phone after reshipment system, the first step is to correct touch screen results have been adjusting the screen infinite loop, this step but would not be performed the following Settings, phone and become bricks... Immediately check the data, begin to do the work, after a night of har